问答

CCS版本为8.3.1。在edit界面不显示problem窗口，点击右上角的view - problem也没用。但是在debug界面可以正常显示problem窗口。不知道怎么可以解决呢？ 附：console窗口在edit界面与debug界面均可以正常显示 已经重新安装过CCS，也没用

利用CCS对CC2640R2F板子在烧写官方给的simplelink_cc2640r2_sdk_3_40_00_10中的rtls_slave的工程时，总是失败，且给的失败原因是： Cortex_M3_0: Can't Run Target CPU: (Error -2134 [url=home.php?mod=space&uid=72445]@[/url] 0x0) Unable to control device execution state. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 8.2.0.00004) Cortex_M3_0: Error: (Error -1170 @ 0x0) Unable to access the DAP. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 8.2.0.00004) Cortex_M3_0: Unable to determine target status after 20 attempts Cortex_M3_0: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is recommended that you reset the emulator before you connect and reload your program before you continue debugging Cortex_M3_0: Failed to write data to temporary buffer in RAM before programming device FLASH memory. addr=0x20000C00, writeLength=4096(0x1000), bufIdx=0 Error: Could not write 0x20000C00: target is not connected Cortex_M3_0: File Loader: Memory write failed: Failed to write data to temporary buffer in RAM before programming device FLASH memory. Cortex_M3_0: GEL: File: E:\workspace_v9\rtls_slave_cc2640r2lp_app\FlashROM_StackLibrary\rtls_slave_cc2640r2lp_app.out: Load failed. 应该怎么解决，有没有人可以帮忙解决一下

在CCS中导入了SCS中的uart Emulator项目之后，进行编译，会出现报错：#1965 cannot open source file "ti/boards/CC26X2R1_LAUNCHXL/Board.h" 请问该如何解决，谢谢